|
...
the competent address for engine electronics and engine technology
Lenz EMS and EGM
· Lenz Engine Management System
· Lenz AutoCoPilot - Graphic vehicle display
· Lenz E-Gas Management
Lenz
Engine Management System
 |
|
 |
- Standard B – housing with 35 channel AMP connector pin and functionally compatible to the 35 channel Bosch wiring loom.
Use:
for BMW E30-M3 / E28-M5-M88-3 / M6-635, for Porsche C1, 944T, 959 ...
- Pin and functionally compatible to the 35 channel WeberMarelli A/B wiring loom.
Use:
for example, Ducati 748-996 / Lancia Integrale
|
 |
- Standard C – housing with 55 channel AMP connector pin and functionally compatible to the 55 channel Bosch wiring loom.
Use:
for BMW M5, 325...– Ferrari 348 – Porsche models 964, 993
|
 |
- Standard D – housing with 88 channel AMP connector pin and functionally compatible to the 88 channel Bosch wiring loom.
Use:
for BMW M3, M5... – Porsche models 993, 993 Turbo, 996
|
 |
New!
- Special Porsche housing with 18 channel AMP connector.
Use:
EMS for Porsche SC and Turbo 1 with lambda regulation, ignition map and dynamic boost control (P911T1)
|
Technical description
"Introduction MMS" as PDF will be available shortly 
[Back to top]
Lenz
E-Gas Management
 |
- For control and regulation of electronic gas butterflies
- For use with varying sizes of throttle bodies
- For use in vehicles and on dynamometers
- Model value as PWM, analog or CAN signal
- Parameters freely programmable
- Additional options available
|
Technical description will be available as a PDF shortly
[Back to top]
Lenz
AutoCoPilot - Graphic vehicle display
 |
- For display of engine and vehicle data
- Use in all vehicles possible
- Information through series data K channel combined with additional sensors and CAN-bus
- Sensor parameters freely programmable
|
Technical description will be available as a PDF shortly
[Back to top]
Alle mit ® bezeichneten Produkte sind eingetragene Warenzeichen
von LENZ Motorentechnik GmbH
Design
and Copyright by LENZ Motorentechnik Gmbh
|
